Description
Seal your acrylic work with a transparent, gloss acrylic layer which is breathable, permanent and protects against UV damage.
Key Features:
- 100% acrylic polymer varnish adds a gloss sheen, protects and resists dirt retention.
- Increases brightness and color saturation and dries clear to a flexible, non-tacky, hard surface.
- Improves surface durability – ideal when shipping or exhibiting.
- Resists discoloration – yellowing and fogging – caused by humidity, heat and UV.
- Semi-opaque when wet, transparent when dry.
How to Use:
- Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness).
- Ensure your space is well ventilated and dirt and dust-free. As this is permanent, do a patch test first.
- Stir gently before use. Do not thin with water, shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry.
- Use long, even strokes, covering the surface top to bottom while moving from one side to the other – don’t go over bits you have missed but leave to dry and then re-varnish area. Don’t apply with a roller or sponge brush.
- Apply up to three thin coats, allowing at least 24 hours dry time between coats. Do not attempt to remove once applied or go back over areas you have already done, as this can cause clouding.
